PRERACING BECOMES AN ECUTEK MASTER TUNER!

Dec 17, 2015Daniel Christie

PRERACING BECOMES AN ECUTEK MASTER TUNER!

Posted: December 17, 2015
ecutek-tuner

 

PREracing has been selected by EcuTek to become an EcuTek Master Tuner! Becoming a Master Tuner allows us to sell and custom-tune ProECU tuning kits. We can now also remotely tune vehicles anywhere in the world.

There are lots of useful and advantageous features to the EcuTek products. It features flex fuel support for most vehicles, the custom maps feature allows you to set up nearly any engine safety function.

This includes but isn’t limited to; oil pressure protection, oil temperature protection, coolant temp protection, air/fuel ratio protection… you get the idea. The custom maps feature can also be used to program traction control and closed-loop boost control. The uses are vast.

EcuTek allows map switching without a handheld device (usually done through the cruise control switch). This switch can also be programmed for on-the-fly boost control, cam control, launch rpm, or anything else you may want.

EcuTek is fast and easy to use. An ECU can be read and modified in as little as 30 seconds! Let's face it. Dyno time is expensive! The faster the process takes the less you have to pay on the dyno.

  • License: $350
  • Cable: $400 (Not required. Can be purchased for at home tuning and data logging.)
  • Tune: $400-$600 (Vehicle dependent)

Being an EcuTek master tuner not only allows for remote tuning and calibrations, but it opens us to a wide number of new vehicles we can tune.

WHAT VEHICLES DO PROECU TUNING SUITES SUPPORT?

To reprogram the ECU, the EcuTek programming interface is simply plugged into the diagnostic socket of the car. Some of the supported vehicles can then be reprogrammed in under 25 seconds!

Unlike other ‘chipping’ solutions, ProECU Tools require no soldering and no physical access to the ECU – an altogether quicker, cleaner, and more reliable method of tuning.

Rather than spending time soldering and desoldering hair-thin chip legs, the tuner’s time can now be spent more productively, with less time spent wiring things up and more time actually improving the mapping of your vehicle's car.

More articles