288.68288.681
Spring / Retainer Kits #5756
GSC has two options for retainers you can either have Chro-Molly or Titanium do to the type of abuse a street cars valve train sees we suggest Chro-Molly and Ti for race car applications. The Chro-Molly will last just as long as the stock units that they will replace. Unlike Titanium these will not become brittle over time. They are only a few ...
GSC Power DivisionGSC Power Division Spring / Retainer Kits

GSC Power Division

Spring / Retainer Kits #5756

$288.68
Select Your Vehicle
Description

GSC has two options for retainers you can either have Chro-Molly or Titanium do to the type of abuse a street cars valve train sees we suggest Chro-Molly and Ti for race car applications. The Chro-Molly will last just as long as the stock units that they will replace. Unlike Titanium these will not become brittle over time. They are only a few grams heavier than Titanium and will not affect performance. GSC Chro-Molly retainers are universal to use with either our single valve springs or our dual springs. The single valve springs do not require a new seat or different seals where as the duals will.

A set of valve springs can be changed in a matter of 2 hours with the correct tools, and is the best insurance a car with upgraded cams can have. The single springs have been tested higher but we suggest a max rev limit of 8500rpms. If higher revs or prolonged periods of revving i.e. road race applications, we suggest going to our dual springs which is more stable at higher rpms and can be revved to 10500rpms. The Single Spring kit includes: Single springs [email protected] with either Titanium or Chro-Molly Retainer.

Beehive Spring Set
GSC Power-Division Beehive springs feature some of the most impressive manufacturing techniques in the industry. Our beehive spring uses an ovate wire which utilizes advanced material heat treatment methods for superior load loss capabilities. What this means to you is our spring has the highest level of spring load retention while still maintaining good fatigue threw out the life of the spring.

The retainer side of the valve spring has a smaller diameter to greatly reduce coil spring surging and improve valve control even at extreme rpm levels.

Only the best materials go into the GSC Power-Division Beehive valve spring. Each batch is scrutinized for tensile strength properties, ductility, inclusion content, and fatigue toughness.

Each new design is tested to 9,000RPMS so you can rest assure that you have the best possible valve spring set available on the market.

The GSC Beehive spring is a factory replacement and will use your stock OEM retainer and Valve Seat to ensure an easy install.

Application List
ImageApplicationDetailStockPriceAdd to Cart
 Subaru BRZ (2013-2017)0$288.68BUY
+ -
Customer Reviews
Share your thoughts with other customers
Login to leave a review
Return Policy

Our goal is to help you find the right product for your project. However, if your purchase doesn’t fit your needs or you are not completely satisfied with your purchase, please see the information below regarding our return policy.

Returns

To obtain an RMA, you may log in to your account page or email our staff at [email protected] . Once an RMA number is issued, repackage the item securely in its original packaging, include the RMA form inside the box, and ship your return as directed by our support team. If you would like a PREracing staff member to generate a shipping label for you, please contact us.

All items must be in new, unused condition with all original tags and labels attached, and include a Return Merchandise Authorization (RMA) from PREracing.com. All returns must be postmarked within thirty (30) days of the purchase date.

Please note, you will be responsible for all return shipping charges unless otherwise specified by PREracing support. We strongly recommend that you use a trackable method to mail your return.

Refunds

A 35% restocking fee will be charged for all returns unless otherwise agreed upon by PREracing.com PRIOR to an RMA number being created.

Please allow at least five (5) days from the receipt of your item to process your return or exchange. Once we receive your return, we will inspect the condition of your item and initiate your refund or exchange. Refunds may take 1-2 billing cycles to appear on your credit card statement, depending on your credit card company. PREracing will notify you by phone or email when your return/refund has been processed.

What happens if my item proves defective after installation?

Please contact PREracing.com and speak directly with a staff member to explain your circumstance. We may ask you to provide additional information regarding your item’s defective status, which might include photos, video, or other means of evidence to support your claim. In some cases, you may be directed to the manufacturer for warranties, replacements, or returns.

If your item proves defective, we will initiate the RMA process and follow the return process as stated above.

What should I do if I received the wrong item?

Please contact PREracing.com and follow the standard return process procedures listed above. You will not be responsible for return shipping charges. You will, however, be required to return your item to PREracing.com before receiving any replacements or refunds.

What should I do if my shipment was delivered damaged?

Please contact PREracing.com to provide proof of the damaged product. Once we obtain satisfactory proof of the damage, we will issue an RMA and provide a return shipping label for the product. Once we receive the damaged package, we will authorize a replacement item be shipped to you.

Refunds on Shipping Charges

PREracing.com does not refund shipping charges. Please make sure to select the correct shipping carrier and timeline for your particular delivery situation (e.g. delivery to PO box, overnight delivery, etc). If the carrier cannot deliver your package based on the information you provided in your order, we will not be held responsible.

In the rare event PREracing.com makes a shipping error or misses a shipping deadline, we will refund the shipping charges. Please work with a staff member to resolve the situation.

If you return an item that originally qualified for free shipping, the shipping total will be subtracted from your final refund total.

Refused Orders / Non-Delivery

Refused or undeliverable orders that are returned to us will automatically be charged a 35% restocking fee, in addition to all freight charges incurred for the shipment by PREracing.com. We will waive the restocking fee if you pay additional shipping to deliver to a new or corrected address.

Questions

If you have any questions concerning our return policy, please contact us at:

503-619-0055

[email protected]

You might be interested in these items
Warning

PROP 65 WARNING

Warning: This product can expose you to chemicals which is [are] known to the state of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.p65warnings.ca.gov

Questions & Answers
Be first to ask a question

Established in 1998, PREracing specializes in forced induction systems and operates with the goal to provide extreme performance at a reasonable price. PREracing features a service shop, showroom, AWD dyno with full tuning capabilities, and a warehouse packed with inventory.

Contacts

Address
13339 NE Airport Way Suite 500
Portland, OR 97230

Open: 9am-6pm PST

TEASoftware