KW - Subaru 04-07 WRX - Coilovers Variant 3 inox-Line Kit
The KW Variant 1 "inox-line" Coilover kit is KW Suspension's entry model for increased driving pleasure with an attractive and individually adjustable lowering. Due to its high-quality finish, the use of struts made from stainless steel, corrosion-resistant springs, and bump stops as well as compatible components stands for long driving pleasure - not just the car's life.
KW Variant 3: Race technology for the road, with adjustable compression and rebound dampening.
Advanced Technology was bred on the racetrack, built for the road. With the KW Variant 3 "inox-line" coilovers you will get much more than just sporty lowering and excellent driving behavior on all roads. It is based on long experience as a suspension manufacturer and supplier for international motorsports, such as the ADAC GT Masters touring car series, FIA GT1, FIA GT3, International GT Open, WTCC, VLN, the legendary ADAC Zurich 24h Nürburgring race, as well as IMSA American LeMans Series, now United SportsCar Championship, SCCA Pro Racing and Pirelli World Challenge in North America. KW Variant 3 "inox-line" coilovers share technology with race coilovers developed in the KW Competition program, they can be adjusted independently in compression and rebound damping. That possibility of individual adjustment is what has made KW Variant 3 "inox-line" Coilover the preferred choice by sports car manufacturers, tuners and drivers worldwide.
Setup Factory pre-configured damping setup: The KW Coilover Variant 1 inox-line has a vehicle-specific, fixed configured damper setup. The spring and damper match perfectly so that you will experience an optimized balance of sportiness and comfort while driving.
Even with a full load and maximum axle loads, the dampers always work with a sporty characteristic. Tuning fans whose focus is Show & Shine events are interested in the KW Variant 1 inox-line.
State-of-the-art motorsport technology enables better performance on the streets. The independently adjustable compression and rebound dampening allow for custom driving setups.
The exclusive KW patented system has dual-level valves that allow for adjustment of the rebound dampening for your road comfort and the compression dampening that controls the driving dynamics.
- Front Drop Height: 0.9"-2.3"
- Rear Drop Height: 0.9"-2.0"
- Front Coil Spring Rate: 6.1 kg/mm (340 lbs/in)
- Shock Absorber Internal Design: Twin-Tube
- Shock Absorber Type: Hydraulic
- Shock Absorber Levels of Damping: 192 Levels
Front Shock Absorber Damping Force Adjustment: Yes
- Rear Shock Absorber Damping Force Adjustment: Yes
- Front Shock Absorber Height Adjustment Type: Threaded Spacer
- Rear Shock Absorber Height Adjustment Type: Threaded Spacer
- Shock Absorber Reservoir: Without External Reservoir
- Shock Absorber Material: Stainless steel
- (2) Front Coilovers
- (2) Rear Coilovers
- (1) KW Tool Kit
- Subaru 04-07 WRX